Dell OptiPlex 160L User Manual
Page 70
Ensure that the card is fully seated and that its bracket is within the card slot.
9.
Secure the card bracket with the screw removed in
10.
Connect any cables that should be attached to the card.
See the documentation for the card for information about the card's cable connections.
11.
Replace the computer cover
.
12.
Connect your computer and devices to electrical outlets, and turn them on.
13.
Install any drivers required for the card as described in the card documentation.
1 card
2 card cutout
3 card connector on system board
4 crossbar
1 not fully seated card
2 fully seated card
3 bracket within slot
4 bracket caught outside of slot
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can cause damage to the equipment.
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.