Dell PowerEdge T110 II - Manual (Page 49)

Using the System Setup Program and UEFI Boot Manager 49
System Utilities Screen
System and Setup Password Features
NOTE: For a forgotten password, see "Disabling a Forgotten Password" on
page 134.
Your system is shipped without the system password feature enabled. Operate
the system only with system password protection.
CAUTION: The password features provide a basic level of security for the data on
your system.
CAUTION: Anyone can access the data stored on your system if the system is
running and unattended.
Using the System Password
When a system password is assigned, the system prompts for the system
password after the system starts and only those with the password have full
use of the system.
Assigning a System Password
Before assigning a system password, enter the System Setup program and
check the System Password option.
When a system password is assigned, System Password is Enabled. If
Password Status is Unlocked, you can change the system password. If Locked,
you cannot change the system password. Disabling the password jumper on
the system board sets System Password to Disabled, and you cannot change
or enter a new system password.
Option Description
System Setup Accesses the System Setup program without rebooting.
System Services Restarts the system and accesses the Dell USC, which
allows you to run utilities such as system diagnostics.
Reset System Restarts the system.
Coaster_HOM.book Page 49 Monday, November 3, 2014 3:23 PM