Dell PowerEdge T110 II - Manual (Page 61)

Installing System Components 61
Front Bezel
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
Removing the Front Bezel
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Open the system. See "Opening the System" on page 59.
3 Slide the drive release latch in the direction of the arrow until it releases
the front bezel from its side hinges. See Figure 3-3.
NOTE: The drive release latch secures and releases the front bezel and helps
to secure the drives.
4 Carefully tilt the front bezel away from the chassis and lift it out as shown
in Figure 3-3.
5 Close the system. See "Closing the System" on page 60.
Coaster_HOM.book Page 61 Monday, November 3, 2014 3:23 PM