Installing a 2.5-inch hard drive – Dell PowerEdge T110 II User Manual

Page 76

Advertising
background image

76

Installing System Components

Figure 3-13. Removing and Installing a 2.5-Inch Hard Drive

6 Slide the hard-drive carrier back in the hard drive bay.
7 Close the system. See "Closing the System" on page 60.
8 Place the system upright on a flat, stable surface.
9 Reconnect the system to its electrical outlet and turn the system on,

including any attached peripherals.

Installing a 2.5-Inch Hard Drive

CAUTION:

Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.

1 Turn off the system and attached peripherals, and disconnect the system

from the electrical outlet.

1

hard drive

2

screws (4)

3

hard-drive bracket

1

2

3

Coaster_HOM.book Page 76 Monday, November 3, 2014 3:23 PM

Advertising