Dell Precision T3400 (Late 2007) - Manual (Page 160)

160
Adding and Replacing Parts
Removing a Memory Module
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 143.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 145).
3 Press out the securing clip at each end of the memory module connector.
4 Grasp the memory module and lift the module straight up and out of the
connector.
If the memory module is difficult to remove, gently ease the module back
and forth while pulling up.
Installing a Memory Module
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 143.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 145).
3 Press out the securing clip at each end of the memory module connector.
1 memory module 2 securing clips (2)
3 memory module connector
2
1
3