Dell Precision T3400 (Late 2007) User Manual
Page 176
Advertising
176
Adding and Replacing Parts
5 Press the release tab on the card retention cover and pivot the cover open.
NOTE:
You can remove the card retention cover, if desired, and set it aside.
6 If necessary, disconnect any cables connected to the card. Grasp the card
by its top corners, and ease it out of its connector.
NOTE:
If you are removing the card permanently, install a filler bracket in the
empty card-slot opening.
NOTE:
Installing filler brackets over empty card-slot openings is necessary to
maintain FCC certification of the computer. The brackets also keep dust and
dirt out of your computer.
1
release tab
2
card retention cover
3
card retention door
3
1
2
Advertising