Dell Precision T3400 (Late 2007) User Manual
Page 241
Advertising
Adding and Replacing Parts
241
3 If you already have a speaker installed, remove the old speaker:
a
Disconnect the speaker cable from the speaker connector on the
system board.
b
Simultaneously grasp the bottom of the speaker with your index finger
and press down on the latch release tab with your thumb.
c
Slide the speaker up and out of the three speaker slots.
1
speaker (optional)
2
latch release tab
3
speaker slots (3)
4
speaker cable
5
speaker connector on system
board
2
1
3
4
5
Advertising