Dell Precision T3400 (Late 2007) User Manual
Page 196
Advertising
196
Adding and Replacing Parts
To install a SAS hard drive:
a
Connect the power cable to the SAS connector.
b
Connect the SAS connector to the hard drive.
c
Connect the other end of the SAS cable to the SAS controller card.
9 Ensure that all connectors are properly cabled and firmly seated.
10 Replace the computer cover (see "Replacing the Computer Cover" on
NOTICE:
To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
1
serial ATA cable
2
SATA0 connector
3
SATA1 connector
4
power cable
5
secondary hard drive bay
6
hard drive in primary hard drive
bay
6
4
1
2
5
3
Advertising