Dell Precision T3400 (Late 2007) User Manual
Page 226
226
Adding and Replacing Parts
13 Enter System Setup (see "Entering System Setup" on page 81) and select
the appropriate Diskette Drive option (for a floppy drive) or a USB option
(for a Media Card Reader).
14 Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 107).
Removing a Floppy Drive or a Media Card Reader (Desktop Computer)
1 Follow the procedures in "Before You Begin" on page 143.
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the front panel (see "Removing the Front Panel" on page 154).
4 Disconnect the power and data cables from the back of the floppy drive or
Media Card Reader.
5 Disconnect the other end of the floppy-drive cable from the system board
connector labeled "FLOPPY" (for a floppy drive) or "USB1" (for a Media
Card Reader). To locate system board connectors, see "System Board
Components" on page 148.