Installing the smartcard reader – Dell Latitude 10 (Late 2012) User Manual
Page 21
Advertising
Installing the SmartCard Reader
1.
Place the SmartCard reader into its slot.
2.
Tighten the screws to secure the SmartCard reader to the system board.
3.
Install the :
a) base cover
b) battery
4.
Follow the procedures in
After Working Inside Your Computer.
Removing the Wireless Wide Area Network (WWAN) Card
NOTE: The WWAN Card is an optional component.
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the :
a) battery
b) base cover
c) SmartCard reader
3.
Disconnect antennae connected to the WWAN card. Lift up the system board connector to release the WWAN
card.
21
Advertising