Processor/dimm blank, Removing a processor/dimm blank – Dell PowerEdge VRTX User Manual
Page 45
Advertising
5. Install the server module in the enclosure.
Figure 16. Replacing the SD vFlash Card
1.
SD vFlash card
2. SD vFlash card slot identification label
3. SD vFlash card slot
Processor/DIMM Blank
CAUTION: If you are permanently removing a processor, you must install a socket protective cap
and a processor/DIMM blank in the vacant socket to ensure proper system cooling. The
processor/DIMM blank covers the vacant sockets for the DIMMs and the processor.
Removing A Processor/DIMM Blank
1.
Remove the server module from the enclosure.
2. Open the server module.
3. Remove the cooling shroud.
45
Advertising