Dell PowerEdge R210 - Manual (Page 49)

UEFI Boot Manager Screen
UEFI Boot Settings Screen
System Utilities Screen
System and Setup Password Features
Your system is shipped without the system password feature enabled. Operate the system only with system password protection.
Using the System Password
When a system password is assigned, the system prompts for the system password after the system starts and only those with the password have full use of
the system.
Down arrow Moves to and highlights the next field.
Spacebar, <Enter>, <+>, <–> Cycles through the settings in a field.
<Esc> Refreshes the UEFI Boot Manager screen, or returns to the UEFI Boot Manager screen from the other program screens.
<F1> Displays the UEFI Boot Manager help file.
Option Description
Continue The system attempts to boot to devices starting with the first item in the boot order. If the boot attempt fails, the system will continue with
the next item in the boot order until the boot is successful or no more boot options are found.
<Boot
options> Displays the list of available boot options (marked with asterisks). Select the boot option you wish to use and press Enter.
NOTE: If you hot-add a boot device, press <ESC> to refresh the list of boot options.
UEFI Boot
Settings Enables you to add, delete, enable, or disable boot options; change boot order; or execute a one-time boot option.
System
Utilities Enables you to access the System Setup program, System Services (Unified Server Configurator [USC]), Diagnostics, and BIOS-level boot
options.
Option Description
Add Boot Option Adds a new boot option.
Delete Boot Option Deletes an existing boot option.
Enable/Disable Boot Option Disables and enables a boot option in the boot option list.
Change Boot Order Changes the order of the boot option list.
One-Time Boot From File Sets a one-time boot option not included in the boot option list.
Option Description
System Setup Accesses the System Setup program without rebooting.
System
Services Restarts the system and accesses the Unified Server Configurator (USC), which allows you to run utilities such as system diagnostics.
BIOS Boot
Manager Accesses the BIOS-level boot options list without rebooting. This option enables you to conveniently switch to BIOS boot mode if you need
to boot to a device with a non-UEFI operating system, such as a bootable DOS media with diagnostics software.
Reboot
System Restarts the system.
NOTE: For a forgotten password, see Disabling a Forgotten Password .
CAUTION: The password features provide a basic level of security for the data on your system.
CAUTION: Anyone can access the data stored on your system if the system is running and unattended.