Troubleshooting the processor – Dell PowerEdge R210 User Manual

Page 61

Advertising
background image

 

4.

Ensure that the expansion-card riser is firmly seated in its connector. See

Installing an Expansion Card

.


 

5.

Ensure that the expansion card is firmly seated in its connector. See

Installing an Expansion Card

.


 

6.

Close the system. See

Closing the System

.


 

7.

If the problem is not resolved, turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

 

8.

Open the system. See

Opening the System

.


 

9.

Remove the expansion card. See

Removing an Expansion Card

.


 

10.

Close the system. See

Closing the System

.


 

11.

Run the appropriate online diagnostic test.

If the tests fail, see

Getting Help

.

 

Troubleshooting the Processor

 

1.

Run the appropriate online diagnostics test. See

Using Online Diagnostics

.


 

2.

Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

 

3.

Open the system. See

Opening the System

.


 

4.

Ensure that the processor and heat sink are properly installed. See

Processor

.


 

5.

Close the system. See

Closing the System

.


 

6.

Run the appropriate online diagnostic test.

If a problem is still indicated, see

Getting Help

.

Back to Contents Page

 

WARNING:

Only trained service technicians are authorized to remove the system cover and access any of the components inside the system.

Before you begin this procedure, review the safety instructions that came with the system.

Advertising