Ac adapter connector, Removing the ac adapter connector – Dell Inspiron 13z (N301z, Mid 2010) User Manual
Page 2
Back to Contents Page
AC Adapter Connector
Dell™ Inspiron™ M301Z/N301Z Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
Removing the AC Adapter Connector
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the module cover (see
Removing the Module Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Remove the palm rest (see
Removing the Palm Rest
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the processor fan (see
Removing the Processor Fan
).
8.
Remove the middle cover (see
Removing the Middle Cover
).
9.
Remove the screw that secures the left hinge-bracket to the computer base.
10.
Turn the computer and remove the screw that secures the left hinge- bracket.
11.
Lift the left hinge-bracket off the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.