Palm rest, Removing the palm rest – Dell Inspiron 13z (N301z, Mid 2010) User Manual
Page 41
Back to Contents Page
Palm Rest
Dell™ Inspiron™ M301Z/N301Z Service Manual
Removing the Palm Rest
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the module cover (see
Removing the Module Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Turn the computer over.
6.
Using a plastic scribe, remove the two rubber caps that cover the palm rest screws on the computer base.
7.
Remove the three screws that secure the palm rest to the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
rubber caps (2)