Display assembly, Removing the display assembly – Dell Inspiron 13z (N301z, Mid 2010) User Manual
Page 20
1.
Follow the instructions in
Before You Begin
.
2.
Place and snap the hinge caps over the display hinges.
3.
Replace the Bluetooth card (see
Replacing the Bluetooth Card
).
4.
Replace the palm rest (see
Replacing the Palm Rest
).
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
7.
Replace the module cover (see
Replacing the Module Cover
).
8.
Replace the battery (see
Replacing the Battery
).
Display Assembly
Removing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the module cover (see
Removing the Module Cover
).
4.
Remove the memory module(s) (see
Removing the Memory Module(s)
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the palm rest (see
Removing the Palm Rest
).
7.
Turn the computer over.
8.
Disconnect the Mini-Card antenna cables from the computer base.
9.
Turn the computer over and open the display as far as possible.
10.
Remove the Bluetooth card (see
Removing the Bluetooth Card
).
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1
Mini-Card antenna cables (4)