Dell Inspiron 13z (N301z, Mid 2010) - Manual (Page 22)

Display Bezel
Removing the Display Bezel
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Using your fingertips, carefully pry up the inside edges of the display bezel to remove it from the display assembly.
Replacing the Display Bezel
1. Follow the instructions in Before You Begin .
2. Align the display bezel with the display panel, and snap the display bezel into place. Ensure that the display cable and the camera cable route through
the hinge portion of the bezel.
3. Replace the display assembly (see Replacing the Display Assembly ).
Display Panel
Removing the Display Panel
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the eight screws that secure the display panel to the display cover.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1 display bezel
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.