7 lift the power supply up and out of the computer, Replacing the power supply in the desktop computer – Dell OptiPlex 360 (Late 2008) User Manual
Page 111
Advertising
Power Supply
111
6 Press down on the release button on the floor of the computer chassis, and
slide the power supply toward the front of the computer by approximately
one inch.
7 Lift the power supply up and out of the computer.
Replacing the Power Supply in the Desktop Computer
NOTE:
This procedure assumes that you have completed the removal procedure
first.
1 Slide the power supply into place at the back of the computer chassis.
2 Replace and tighten the two screws that secure the power supply to the
back of the computer chassis.
1
release button
2
power supply
3
screws (2)
4
AC power connector
1
2
3
4
Advertising