Dell OptiPlex 360 (Late 2008) - Manual (Page 62)

62 Drives
6 Follow the procedure in "After Working on Your Computer" on page 17.
7 Update the configuration information in the system setup program by
setting the appropriate Drive option (0 or 1) under Drives. For more
information on using the system setup program, see the Dell Technology
Guide on your computer or at support.dell.com.
8 Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 136).
Floppy Drive or Media Card Reader
Removing a Floppy Drive or Media Card Reader From the Mini Tower
Computer
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
1 Disable the floppy drive or media card reader in the system setup program.
For more information on using the system setup program, see the Dell
Technology Guide on your computer or at support.dell.com.
2 Follow the procedure in "Before Working on Your Computer" on page 9.
3 Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19).
4 Remove the drive panel insert by sliding the drive release latch downward.