7 lift the drive out of the computer, 4 connect the power and data cables to the drive – Dell OptiPlex 360 (Late 2008) User Manual
Page 77
Drives
77
7 Lift the drive out of the computer.
8 Disconnect the power and data cables from the drive.
Replacing or Adding a Hard Drive in a Desktop Computer
NOTE:
This procedure assumes that you have completed the removal procedure
first.
1 Check the documentation for the drive to verify that it is configured for
your computer.
CAUTION:
To avoid damage to the drive, do not set it on a hard surface. Instead,
set the drive on a surface, such as a foam pad, that will sufficiently cushion it.
2 Unpack the replacement hard drive, and prepare it for installation.
3 If your replacement hard drive does not have the plastic hard-drive bracket
attached, install the new drive in the existing bracket (see "Hard Drive
Bracket — Desktop Computer" on page 79) .
4 Connect the power and data cables to the drive.
1
plastic securing clips (2)
2
hard drive
1
2