Dell OptiPlex 360 (Late 2008) - Manual (Page 21)

Computer Cover 21
Replacing the Mini Tower Computer Cover
NOTE: This procedure assumes that you have completed the removal procedure
first.
1 Ensure that all cables are connected, and fold cables out of the way.
2 Ensure that no tools or extra parts are left inside the computer.
3 Insert the two clamps on the edge of the chassis into the clamp slots on the
cover.
4 Press the computer cover down until you feel a click.
5 Ensure that the cover is seated correctly.
6 Set the computer upright.
CAUTION: Ensure that none of the air vents of the computer are blocked.
7 Follow the procedure in "After Working on Your Computer" on page 17.
Desktop Computer Cover
Removing the Desktop Computer Cover
1 Follow the procedure in "Before Working on Your Computer" on page 9.
NOTE: Ensure that sufficient space exists to support the removed cover.
CAUTION: Ensure that you are working on a level, protected surface to avoid
scratching either the computer or the surface on which it is resting.
2 Set your computer on its right side with the computer cover facing up.