Dell OptiPlex 360 (Late 2008) - Manual (Page 34)

34 Cards
10 Secure the card(s) by closing the card retention latch and snapping it into
place.
CAUTION: Do not route card cables over or behind the cards. Cables routed over
the cards can prevent the computer cover from closing properly or cause damage
to the equipment.
11 Connect any cables that should be attached to the card.
For information about the card’s cable connections, see the
documentation the card.
12 Follow the procedure in "After Working on Your Computer" on page 17.
13 IIf you installed a network adapter card and want to turn off the integrated
network adapter, use the system setup program. For more information on
using the system setup program, see the Dell Technology Guide on your
computer or at support.dell.com.
CAUTION: If your computer supports Active Management Technology (AMT),
disabling the integrated network adapter also disables AMT functionality.
1 alignment guides (4)
1