Dell OptiPlex 960 (Late 2008) - Manual (Page 108)

9. Position the new fan and shroud assembly onto the heatsink, aligning the screw holes in the shroud with the holes in the heatsink.
10. Secure the fan shroud to the heatsink with the four screws removed in the step above.
11. Connect the two fan cables to the system board (see System Board Components ).
12. If the system contained a wireless card that was removed in a previous step, replace the card (see Internal Wireless Card - Installation ).
13. Reroute cables through guides on the fan shroud.
14. Replace the optical drive (see Installing an Optical Drive ).
15. Replace the hard drive and shroud assembly.
16. Perform the procedure After Working on Your Computer .
Back to Contents Page
1 fan and shroud assembly 2 fan shroud screws (4)
3 fan cable connectors (2)