Dc power connectors – Dell OptiPlex 960 (Late 2008) User Manual
Page 127
14.
Reconnect the DC power cables to the system board and drives (see
System Board Components
and
`Drives
).
15.
Replace the floppy drive or media card reader (see
Installing a Floppy Drive
).
16.
Replace the optical drive (see
Installing an Optical Drive
).
17.
Replace the hard drive and shroud assembly (see
Replacing the Hard Drive and Shroud Assembly
).
18.
Perform the procedure
After Working on Your Computer
.
19.
Connect the AC power cable to the power supply AC power connector.
20.
Connect your computer and devices to electrical outlets, and turn them on.
DC Power Connectors
DC Power Connector P1
NOTICE:
To connect a network cable, plug the cable into the network wall jack and then plug it into the computer.
Pin Number
Signal Name
18-AWG Wire
1
+3.3 VDC
Orange
2
+3.3 VDC
Orange
3
GND
Black
4
VCC (+5 V)
Red
5
GND
Black
6
VCC (+5 V)
Red
7
GND
Black
8
PS_PWRGOOD*
Gray
9
P5AUX
Purple
10
V_12P0_DIG
Yellow
11
V_12P0_DIG
Yellow