Dell OptiPlex GX1 User Manual
Page 107
ISA Configuration Utility Messages: Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SIG/isa.htm[2/21/2013 12:07:27 PM]
configure PCI device,
ID=DeviceID.
Failed to configure Number
of Total Count Plug and
Play ISA devices. Use your
system's configuration
utility to resolve
conflicts. Press any key to
continue.
NOTE: If you do not have documentation
listing the allowable resource values, see
the corrective action for these messages on
the following page.
1. Start the ICU.
Any Plug and Play or PCI expansion
cards that could not be configured
should be marked config err on
the list of cards in the ICU window.
2. Select the System Resources
option from the View menu.
The System Resource Usage dialog
box displays all resources currently
used by the system.
3. Select one of the resources used
by your Plug and Play or PCI
expansion card, and click Used By
Card.
The Card Resources Usage dialog
box identifies which device is using
the resource.
4. Repeat step 3 until you have
identified all conflicting resources
and the cards that use them.
5. Modify the cards, as needed, to
free the resources required by the
unconfigured Plug and Play or PCI
expansion card.
See "
" for
instructions.
WARNING: Could not
configure Plug and Play
Card Name.
WARNING: Could not
configure PCI device,
ID=DeviceID.
Failed to configure Number
The card(s)
mentioned are not
fully configured due to
resource conflicts.
If you do not know the allowable resource
values for your Plug and Play or PCI
expansion card, use the following
procedure to locate and resolve the
resource conflict:
1. Remove all card configurations
from the ICU.
See "
" for