Dell OptiPlex GX1 - Manual (Page 45)

Using the ISA Configuration Utility: Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SIG/utility.htm[2/21/2013 12:07:21 PM]
9. To change individual resource values for the current configuration setting, select the resource
value that you want to change and click the Options button located below the resource values
(see
Figure 6 ).
For example, when you click the value under DMA, the Options button changes to the DMA Options
button. When you click this button, a smaller dialog box appears. By clicking the down arrow next to the
current resource value, you can display a list of the available values for the resource.
Figure 6. Configuration Settings Dialog Box for Assigning a DMA Channel
Choose the desired value and click OK. The value you selected is displayed under the resource
heading in the Configuration Settings dialog box.
The Options button is disabled if no alternative values are available for the selected resource.
NOTE: If you change one or more resource values using the Options button and later change
the setting in the Configuration Choice box, the changes that you made to the resource values
are overwritten by the default values for the new configuration choice.
10. Click OK in the Configuration Settings dialog box when you have finished selecting resources
for the function.
NOTE: After modifying the system configuration, you must turn off the system to install, remove, or
change jumper settings on the non-Plug and Play ISA expansion cards to match the settings you
selected in the ICU.