Dell OptiPlex GX1 - Manual (Page 108)

ISA Configuration Utility Messages: Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SIG/isa.htm[2/21/2013 12:07:27 PM]
of Total Count Plug and
Play ISA devices. Use your
system's configuration
utility to resolve
conflicts. Press any key to
continue. instructions.
2. Reboot your system.
The ICU should automatically
configure your Plug and Play or PCI
expansion card.
3. Add the ISA expansion cards back
into the ICU, resolving any
resource conflicts as they arise.
See " Adding a Listed Card " for
instructions.
If your Plug and Play or PCI expansion
card is not automatically configured when
you reboot the system with all other cards
removed, you should contact the
manufacturer of the card or see "
Getting
Help " in your Diagnostics and
Troubleshooting Guide.
WARNING: Boot Device
conflict detected! CSN=Card
Select Number Error=Error. One of the devices is
attempting to use one
or more resources
assigned to the
system's boot device. Perform the following procedure:
1. Start the ICU.
2. Identify the card marked config
err.
This card is attempting to use one or
more resources required by the
system's boot device.
3. Follow the procedure for the
preceding error message in this
table.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online
System User's Guide.
Back to Contents Page