Dell OptiPlex GX1 - Manual (Page 44)

Using the ISA Configuration Utility: Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SIG/utility.htm[2/21/2013 12:07:21 PM]
7. To change any of the resource settings for the card, select the resource setting and then click
Settings.
The Configuration Settings dialog box (see Figure 4 ) displays the name of the resource that you
selected in the upper-left corner of the box. The resource values currently associated with the selected
function are displayed in the Resources for Choice box. The resource values displayed are IRQ, DMA,
Memory (Hex), and I/O Port (Hex).
Figure 4. Configuration Settings Dialog Box for Assigning an IRQ Line
8. To change the resource settings, click the down arrow next to the Configuration Choice box.
Then click the new resource setting from the list of available settings (see Figure 5 ).
You cannot manually enter a value; you must choose a setting from the list. If there is only one setting
listed, no other settings are available.
The setting that you select may affect the resources available. For example, if you are offered the
Disabled option and select it, all resource values are blank, indicating that a disabled setting uses no
resources.
Figure 5. Available Settings List Box