Shield, Removing the shield, Replacing the shield – Dell Studio One 19 (1909, Early 2009) User Manual
Page 32
Back to Contents Page
Shield
Dell Studio One 19/1909 Service Manual
Removing the Shield
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
To remove the shield loosen the eight captive screws that secure the shield to the computer.
Replacing the Shield
1.
Follow the procedures in
Before You Begin
.
2.
Position the shield over the computer and tighten the eight captive screws.
3.
Replace the computer cover (see
Replacing the Computer Cover
).
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1
captive screws (8)
2
shield
NOTE:
Before replacing the shield, ensure that all the cables are connected and that no tools or extra parts (including screws) are left inside the
computer.