Replacing the system board – Dell Studio One 19 (1909, Early 2009) User Manual
Page 41
11.
Lift the system board out of the chassis.
Replacing the System Board
1.
Follow the instructions in
Before You Begin
.
2.
To replace the system board place the system board back in the chassis.
3.
Replace the five M2.5 x 5-mm screws that secure the system board to the chassis.
4.
Replace the five screws that secure the system board to the chassis.
5.
Reconnect the cables to the system board.
6.
Replace the system fan and heat sink assembly (see
Replacing the System Fan and Heat Sink Assembly
).
7.
Replace the processor fan and heat sink (see
Replacing the Processor Fan
and
Replacing the Heat Sink
).
8.
Replace the back I/O panel (see
Replacing the Back I/O Panel
).
9.
Replace the stand (see
Replacing the Stand
).
10.
Replace the shield (see
Replacing the Shield
).
11.
Replace the computer cover (see
Replacing the Computer Cover
).
12.
Turn on the computer.
13.
Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.
Back to Contents Page
1
screws (5)
2
M2.5 x 5-mm screws (5)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag in the BIOS of the replacement system board.