Dell Vostro 1400 (Mid 2007) - Manual (Page 170)

170
Adding and Replacing Parts
Replacing the Optical Drive
1 Slide the optical drive into the bay.
2 Replace and tighten the locking screw.
Central Control Cover
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1 optical drive 2 locking screw 3 notch
1
2
3
book.book Page 170 Wednesday, September 16, 2009 11:12 AM