Replacing the memory module – Dell Vostro 1400 (Mid 2007) User Manual
Page 176
Advertising
176
Adding and Replacing Parts
Replacing the Memory Module
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1 Align the notch in the module edge connector with the tab in the
connector slot.
2 Slide the module firmly into the slot at a 45-degree angle, and rotate the
module down until it clicks into place. If you do not feel the click, remove
the module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
1
memory module
2
securing clips (2)
2
1
book.book Page 176 Wednesday, September 16, 2009 11:12 AM
Advertising