Dell Vostro 1400 (Mid 2007) - Manual (Page 99)

Setting Up and Using Networks
99
Setting Up and Using Networks
Setting up a computer network provides connectivity between your computer
and the Internet, another computer, or a network. For example, with a
network set up in a home or small office you can print to a shared printer,
access drives and files on another computer, browse other networks, or access
the Internet. You can set up a local area network (LAN) using a network or
broadband modem cable or set up a wireless LAN (WLAN).
The Microsoft Windows
®
XP and Microsoft Windows Vista™ operating
systems provide wizards to help guide you through the process of networking
computers. For more information about Networking, see the Windows Help
and Support Center (see "Windows Help and Support" on page 19).
Connecting a Network or Broadband Modem
Cable
Before you connect your computer to a network, the computer must have a
network adapter installed and a network cable connected to it.
1 Connect the network cable to the network adapter connector on the back
of your computer.
NOTE:
Insert the cable connector until it clicks into place, and then gently
pull on the cable to ensure that it is securely attached.
2 Connect the other end of the network cable to a network connection
device or a network wall connector.
NOTE:
Do not use a network cable with a telephone wall connector.
book.book Page 99 Wednesday, September 16, 2009 11:12 AM