Dell Vostro 1400 (Mid 2007) - Manual (Page 178)

178
Adding and Replacing Parts
4 Remove the modem cable.
5 Remove the modem by using the pull-tab.
6 Install the replacement modem by pressing the modem into the connector
on the system board.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors and realign the card.
7 Connect the modem cable.
8 Tighten the three screws and replace the modem cover.
1 screw 2 pull-tab
3 modem cable 4 modem
3
4
1
2
book.book Page 178 Wednesday, September 16, 2009 11:12 AM