Drive panel, Removing the drive panel – Dell XPS 710 User Manual
Page 52
9.
Replace the computer cover (see
10.
Connect the computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Drive Panel
Removing the Drive Panel
1.
.
2.
Remove the computer cover (see
).
3.
Grasp the drive release latch and slide it towards the base of the computer until the drive panel snaps open.
4.
Pivot the drive panel outward and lift it from its side hinges.
1
power cable
2
data cable
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1
drive release latch
2
drive panel
3
drive panel tabs