Dell XPS 710 - Manual (Page 54)

5. Slide the drive release latch towards the base of the computer to release the shoulder screw, and then slide the drive out of the drive bay.
6. Replace the drive panel (see Replacing the Drive Panel ).
7. Replace the computer cover (see Replacing the Computer Cover ).
8. Connect the computer and devices to electrical outlets, and turn them on.
Installing a Floppy Drive
1. Follow the procedures in Before You Begin .
2. Remove the computer cover (see Removing the Computer Cover ).
3. Remove the drive panel (see Removing the Drive Panel ).
4. Remove the existing floppy drive, if applicable (see Removing a Floppy Drive ).
1 power cable 2 floppy drive data cable
1 drive release latch 2 floppy drive
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.