Optical drive or filler plate. see figure 3-16 – Dell PowerEdge 6950 User Manual
Page 71
Advertising
Installing System Components
71
Figure 3-16.
Installing an Optical Drive in the Drive Carrier
5 Install the new optical drive in the carrier. See Figure 3-16.
The pins on the carrier fit into the corresponding holes in the side of the drive.
6 Attach the interface board to the back of the carrier, using the two plastic rivets. See Figure 3-16.
7 Reinstall the latch and tighten the thumbscrew.
8 Slide in the drive carrier until the tray snaps into place. See Figure 3-14
9 Replace the front bezel, if applicable. See "Removing and Replacing the Optional Front Bezel" on
10 Reconnect the system and peripherals to their electrical outlets.
1
diskette/optical drive carrier
2
optical drive
3
interface board
4
plastic rivets (2)
5
latch
6
thumbscrew
1
6
3
5
4
2
Advertising