Dell PowerEdge 6950 - Manual (Page 92)

92
Installing System Components
Figure 3-29. Removing and Installing the RAID Battery Compartment
13 Remove the system board:
a Pull up the spring-loaded blue retention pin located in the center of the system board, and then
slide the system board toward the front of the chassis until it stops. See Figure 3-30.
b Slowly and evenly lift the system board above the retention hooks, ensuring that the system board
is clear of all retention hooks, then evenly lift up the left side of the system board. See Figure 3-30.
c Lift the system board out of the chassis, left side first.
1 securing tabs (2) 2 securing slots (2) 3 RAID battery compartment
2
1
3