Dell C2660dn Color Laser Printer - Manual (Page 154)

Auto Reset 45 seconds
1 minute
2 minutes Sets the amount of time before the printer automatically
resets the settings on the operator panel to the defaults
when no additional settings are made.
3 minutes
4 minutes
Fault Time-out 0
Available Range: 3–300 seconds Sets the amount of time the printer waits before canceling
a job when the job stops abnormally.
Job Time-out 0
Available Range: 5–300 seconds Sets the amount of time the printer waits for additional
data from the computer before it cancels the job.
Date & Time Time Zone Sets the time zone.
Set Date Sets the date.
Set Time Sets the time. You can select AM or PM when Time
Format is set to 12 Hour.
Date Format Sets the date format.
Time Format Sets the time format in 24 Hour or 12 Hour.
Audio Tone Control Panel
Tone
Off Does not emit a tone when the operator panel input is
correct.
On Emits a tone when the operator panel input is correct.
Invalid Key Tone Off Does not emit a tone when the operator panel input is
incorrect.
On Emits a tone when the operator panel input is incorrect.
Machine Ready
Tone
Off
On Does not emit a tone when the printer becomes ready.
Emits a tone when the printer becomes ready.
Job Completed
Tone
Off
On Does not emit a tone when a print job is complete.
Emits a tone when a print job is complete.
Fault Tone Off Does not emit a tone when a job ends abnormally.
On Emits a tone when a job ends abnormally.
Alert Tone Off Does not emit a tone when a problem occurs.
On Emits a tone when a problem occurs.
Out of Paper Alert
Tone
Off
On Does not emit a tone when the printer runs out of paper.
Emits a tone when the printer runs out of paper.
Low Toner Alert
Tone
Off
On Does not emit a tone when the toner is low.
Emits a tone when the toner is low.
Auto Clear Alert
Tone
Off Does not emit a tone before the printer performs auto
clear.
On Emits a tone 5 seconds before the printer performs auto
clear.
mm / inch Millimeters(mm)
Inches(") Selects millimeter or inch as the default measurement
unit.
Default Paper Size A4 (210x297mm) Sets the default paper size.
Letter (8.5x11")
Understanding the Tool Box Menus 152