Dell C2660dn Color Laser Printer - Manual (Page 225)

5 If prompted, install the printer driver on your computer. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.
6 Complete the additional steps in the wizard, and then click Finish.
7 Print a test page to verify print installation.
a Click Start→ Devices and Printers (Start→ Control Panel→ Hardware and Sound→ Printers for Windows
Vista and Windows Server 2008).
For Windows 8 and Windows Server 2012:
Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel →
Hardware and Sound (Hardware for Windows Server 2012)→ Devices and Printers.
b Right-click the printer you just created, and then click Printer properties (Properties for Windows Vista and
Windows Server 2008).
c On the General tab, click Print Test Page. When a test page prints successfully, installation is complete.
Printing With Wi-Fi Direct™
This section provides information for Wi-Fi Direct printing. Wi-Fi Direct allows your Wi-Fi mobile devices such as
computers, smart phone, and tablets, to connect to the printer directly via a Wi-Fi network. With Wi-Fi Direct, you
can print documents, photos, or e-mail on your Wi-Fi mobile devices directly without a wireless access point.
NOTE: Wi-Fi Direct is available when the optional wireless adapter is installed.
NOTE: Wi-Fi Direct is available even if the printer is connected to your wireless network connection using the optional wireless
adapter.
NOTE: Only printing function is available via the Wi-Fi Direct network.
NOTE: The maximum number of devices that can be connected via the Wi-Fi Direct network is 1.
NOTE: You cannot connect your mobile device to the internet via the printer’s Wi-Fi Direct network.
NOTE: Depending on the device, the channel used to connect the device to the printer via Wi-Fi Direct may differ from the
channel used by the printer to connect to a network via Wi-Fi infrastructure mode. In such a case, simultaneous connection with
Wi-Fi Direct and Wi-Fi infrastructure mode may not work properly.
Setting Up Wi-Fi Direct
To use Wi-Fi Direct, you need to first set up the Wi-Fi Direct settings from the operator panel of the printer. To
connect the mobile device to the printer via Wi-Fi Direct, select the SSID of the printer from the list of wireless
networks on the mobile device and enter the passphrase necessary for connection.
Setting Up the Printer
1 Press the (Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the (Set) button.
3 Press the
button until Network is highlighted, and then press the (Set) button.
4 Press the
button until Wi-Fi Direct is highlighted, and then press the (Set) button.
5 Press the
button until Wi-Fi Direct is highlighted, and then press the (Set) button.
6 Press the
button until Enable is highlighted, and then press the (Set) button.
When a popup message about the devices is displayed, press the
( Set) button to select Close.
7 Press the
button until Group Role is highlighted, and then press the (Set) button.
8 Press the
button to select Group Owner, and then press the (Set) button.
Printing 223