Dell C2660dn Color Laser Printer - Manual (Page 189)

Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing)
Values:
K Offset 0 * If faint black colored ghosts appear, try to decrease the value.
Available Range: -5 to +5
YMC Offset 0 *
Available Range: -5 to +5
If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease
the value.
Adjust 2nd BTR
. NOTE: The print quality changes depending on the setting values you select for this item.
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
Values:
Plain
Plain Thick
0 *
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Sets the transfer roller voltage in increments of 1. The default
settings may not give the best output on all paper types. If you see
mottles on the print output, try to increase the voltage. If you see
white spots on the print output, try to decrease the voltage.
Covers
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Covers Thick
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Coated
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Coated Thick
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Label
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Envelope
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Recycled
Available Range:
(Lighten) -5 to (Darken) +10
0
*
Available Range:
(Lighten) -5 to (Darken) +10
Understanding the Printer Menus 187