Removing the front bezel, Installing the front bezel, Removing the expansion card – Dell OptiPlex 3010 (Mid 2012) User Manual
Page 10
Advertising
Removing the Front Bezel
1.
Before Working Inside Your Computer
2.
Remove the
.
3.
Pry the front bezel retention clips away from the chassis.
4.
Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.
Related Links
Installing The Front Bezel
1.
Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2.
Rotate the bezel towards the computer to engage the four front-bezel retention clips until they click into place.
3.
.
4.
After Working Inside Your Computer
.
Related Links
Removing the Expansion Card
1.
Before Working Inside Your Computer
2.
Remove the
.
3.
Rotate the release tab on the card-retention latch upward.
10
Advertising