Dell OptiPlex 3010 (Mid 2012) - Manual (Page 24)

Related Links
Installing The Front Thermal Sensor
Installing The Front Thermal Sensor
1. Secure the thermal sensor to the chassis front.
2. Thread the thermal-sensor cable into the chassis clips.
3. Connect the thermal-sensor cable to the system board.
4. Install the front bezel .
5. Install the cover .
6. Follow the procedures in After Working Inside Your Computer .
Related Links
Removing The Front Thermal Sensor
Removing The System Fan
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the cover .
3. Remove the front bezel .
4. Disconnect the system-fan cable from the system board.
5. Unthread the system-fan cable from the chassis clips.
24