Dell OptiPlex 3010 (Mid 2012) - Manual (Page 41)

Option Description
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer".
Client IP Specifies the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP"
is set to "Static IP".
Client Subnet Mask Specifies the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP"
is set to "Static IP".
Client Gateway Specifies the gateway IP address for the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP"
is set to "Static IP".
License Status Displays the current license status.
Table 11. System Logs
Option Description
BIOS Events Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
41