Removing and installing components, Removing the cover, Installing the cover – Dell OptiPlex 3010 (Mid 2012) User Manual
Page 9: 2 removing and installing components
Advertising
2
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Removing the Cover
1.
Before Working Inside Your Computer
2.
Pull up the cover-release latch at the side of the computer.
3.
Lift the cover upward to a 45–degree angle and remove it from the computer.
Related Links
Installing The Cover
1.
Place the computer cover on the chassis.
2.
Press down on the computer cover until it clicks into place.
3.
After Working Inside Your Computer
.
Related Links
9
Advertising