Dell POWEREDGE M1000E - Manual (Page 25)

Access Gateway Administrator’s Guide 5
53-1002743-01
Fabric OS features in Access Gateway mode
1
Buffer credit recovery support
This Fabric OS feature is supported on 8 Gbps and 16 Gbps platforms in following configurations:
• Between AG switch F_Port and Brocade HBA port using Adapter v3.2 or greater firmware or any
device supporting credit recovery, This feature only works at the maximum supported speed of
the HBA port (8 Gbps or 16 Gbps).
• Between AG switch N_Port and Brocade fabric switch or cascaded AG switch F_Port.
Name Server NA
Native Interoperability Mode NA
Network Time Protocol (NTP) No (no relevance from fabric perspective) 2
Open E_Port NA
Performance Monitor Yes
Persistent ALPA Yes
Port Decommission No
Port Mirroring No
QuickLoop, QuickLoop Fabric
Assist No
Remote Authentication
Dial-In User Service
(RADIUS) Yes
Resource Monitor Yes
Security Yes (ADS/DCC Policy)
SNMP Yes
Speed Negotiation Yes
Syslog Daemon Yes
Track Changes Yes
Trunking Yes**
User-Defined Roles Yes
ValueLineOptions (Static
POD, DPOD) Yes
Virtual Fabrics No
Refer to
“Virtual Fabrics support” on page 6.
Web Tools Yes
Zoning NA
1. When a switch is behaving as an AG, RBAC features in Fabric OS are
available, but there are some limitations. For more information on the
limitations, refer to
“Access Gateway hardware considerations” on page 11.
2. In embedded switches, time should be updated by the server management
utility.
TABLE 1 Fabric OS components supported on Access Gateway (Continued)
Feature Support