Dell POWEREDGE M1000E - Manual (Page 92)

72 Access Gateway Administrator’s Guide
53-1002743-01
Considerations for the Brocade 6505 and 6510
3
• The following commands have restricted usage, mostly because the Brocade 8000 contains
only eight Fibre Channel ports and does not support the Automatic Port Configuration policy:
- ag --pgcreate
- ag --policyenable
- ag --policydisable
- portcfgdefault
• To enable or disable FCoE ports, use fcoe --enable and fcoe --disable instead of portdisable
and portenable.
• The portcfgdefault command resets the degraded state and NPIV PerPort and clears the
BufferLimitedMode on a port. For other AG platforms, this command restores the port
configuration to factory default values.
Considerations for the Brocade 6505 and 6510
The Brocade 6505 and 6510 can function in either Fabric OS Native mode or Brocade Access
Gateway mode.These switches are shipped in Fabric OS Native mode. All ports on demand (POD)
licenses must be present to support Access Gateway.