Server module board connectors, Table a, For information about the dip switch designations – Dell POWEREDGE 1855 User Manual
Page 3: Lists the settings for the dip switch
Advertising
Table A-1. Server-Module DIP Switch Settings
Server Module Board Connectors
for the location and description of server module board connectors.
Figure A-3. Server Module Board Connectors
DIP Switch
Setting
Description
PASSWD
(Switch 1)
(default)
The password feature is enabled when switch 1 is set to "on."
The password feature is disabled when switch 1 is set to "off."
NVRAM_CLR
(Switch 2)
(default)
The configuration settings in NVRAM are retained at system boot when switch 2 is set to "off."
The configuration settings in NVRAM are cleared at next system boot when switch 2 is set to "on."
"on"
"off"
Advertising