Dell DX6000 - Manual (Page 31)

Updating the Dell DX Object Storage Platform Software 33
To verify cluster compatibility:
1 Open the file /opt/dell/dellACM/CMREPORT.TXT on the primary
Cluster Services Node.
2 Review the status information for the Cluster Services Node and the
individual Storage Nodes.
3 For more detailed component status information, run the following
command:
#/opt/dell/dellACM/dellacmscr.sh -report -host=
<host name>
where <host name> is the name of the cluster services node or a storage
node and can be obtained from the CMREPORT.txt file.
For more information on updating the Cluster Services Node and the Storage
Node software, see "Updating the DX Cluster Services Node Software" on
page 34 and "Updating the DX Storage Node Software" on page 34.
Troubleshooting the Compatibility Manager
If you experience problems with Compatibility Manager, verify that the latest
version is installed. Compatibility Manager can be downloaded from
support.dell.com. Run the following commands to determine the current
version of:
• The package name— #rpm -q -a|grep dellacm
• The package details—#rpm -q -i <package name>
If the problems persist, contact Dell.
book.book Page 33 Monday, October 17, 2011 3:42 PM