Dell Vostro 200 (Mid 2007) - Manual (Page 102)

102
Removing and Installing Parts
4 Release the computer cover by pulling it away from the front of the
computer and lifting it up.
5 Set the cover aside in a secure location.
Removing the Support Bracket
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover. See "Removing the Computer Cover" on
page 101.
3 Release the card retention bracket by lifting the card retention release
lever up.
4 Remove any cable which is secured in the support bracket cable clamp
from the cable clamp.
5 Pivot the support bracket and lift it off the hinge tabs.
1 computer cover 2 screws (2)
1
2